Home improvement wire vga cable fire precautions

Fire caused by improper renovation construction and renovation is one of the main home fires, in which 30 percent of residential fires are caused by improper construction or old electrical wiring caused. Therefore, electrical wiring fire in the home renovation process can not be ignored. 1, home decoration common wire and cable
Power wires: power cable conductor with an insulating layer of outsourcing, communication cables: mainly used for transmission of audio, 150kHZ and below the analog signal and 2048kbit / s and below WISDOM Terminal BLOCK  the digital signal. Common household audio communication cables audio cable, telephone lines, cable, etc. 2, wire and cable optional method
The right to buy the electricity wires and cables to ensure the safety of home renovation process also. Therefore, the time required to buy wire and cable pay attention to two things. Home Improvement Tips to buy electric wire and cable wire communications cable
Suitable for use where the socket wiring, face to face, such as audio cable power lines, telephone lines, cable, etc.
2, see the quality, appearance and smooth round, bright color uniform, fine texture; has certification mark, the manufacturer, such as the wire diameter, yellow-green ground with a small exterior dimensions of the insulating layer, uniform color, with no damage to the insulation shell wear. 3, buy Grossly method: Observe the appearance of color. Hand touch: the appearance of round, smooth Grossly: Observe the appearance of color, to see whether the fine workmanship hand touch: check for damage 3, wire and cable fire precautions in the home renovation process, if not WISDOM HDMI CABLE  used properly wire and cable, or choose inferior or old wire and cable, can easily lead to fires. Therefore, the construction process and storage precautions must be taken during construction materials 1) wires and cables should be how to deal with renovation sites, avoiding scattered Rolls of wire and cable, must be kept away from open flames. Wires and cables should not be exposed to direct sun off the light or ultra-high temperature, especially for the construction of the wire. The wires must be installed with plastic or metal pipe jacket to avoid being man-made damage. For laying in the ceiling, into the walls and other places where the wires in the pipeline, can not have wire connectors. 2) how to deal with fire wire cable? To cut off the power first, then select the uncharged fire extinguishers, as dry powder, carbon dioxide, 1211 fire extinguishers, avoid the use of foam. Note that in the course of fire, and the fire service to keep a safe distance between the equipment and the charged body. When fighting for overhead wires, elevation between ordinary people and the charged body should not exceed 45 °, and stood in line outside the fire.